We Brew Coffee

Fixing Common Keurig Milk Frother Issues: Troubleshooting Guide

Common Keurig Milk Frother Issues and Solutions

Frothed milk can take a cup of coffee to the next level, and the Keurig milk frother is a popular kitchen appliance that allows you to froth milk quickly and easily. However, just like any other kitchen appliance, it can sometimes have its issues.

This article presents some common problems and solutions to fix Keurig milk frother issues.

1. Flashing Light On The Front

The Keurig K Cafe Frother has a front light that helps you know when it’s switched on and in operation. A flashing light means it’s having problems doing what it’s supposed to do.

Here’s how you can restore your Keurig milk frother:

  • Unplug the device.
  • Remove and clean the frothing wand, ensuring it’s properly aligned.
  • Ensure the jug is on the base before switching the device on again.

2. Misaligned Frothing Wand

If the frothing wand is not aligned properly, it affects the steam delivery and output of the frother. Here are some steps you can follow to resolve this issue:

  • Carry out a steam test – without milk in the jug, switch on the frother and allow it to run for a few seconds.
  • Check to see if there is steam coming out of the wand. – If there’s no steam, try adjusting the frothing wand.
  • Check your instruction manual to see the recommended angle for the frothing wand. – If it does emit steam, it means there’s a software glitch, and you will need to reset the device.

3. Frother Not Covered With Its Lid

The Keurig frother has a lid that prevents the milk from splattering outside the jug during the frothing process, and it also goes a long way in ensuring the frother works correctly. Without the lid, the device may not function correctly.

Here’s what to do:

  • Ensure the device is plugged in, and the Power button is switched on.
  • Place the frother jug with milk inside the frother base, ensuring it is adequately seated.
  • Place the lid on the frother jug.
  • Press the Froth button.

The frother will begin to operate correctly.

4. Milk Is Above The Max Line

The frother jug has a maximum fill line, which should not be exceeded. If the milk is past the maximum fill line, it will spill over when frothing.

Here’s how to fix it:

  • Ensure you are using the correct jug that matches your frother model.
  • Fill milk to the appropriate line if possible.
  • If the milk is already above the line, you can pour some milk out.
  • Clean the frother jug after use.

5. Whisk Not Sat Properly

The frother has several components, including moving parts like the whisk. Sometimes, the whisk might not be correctly seated, causing the frother to malfunction.

Here’s what you can do:

  • Remove the whisk and re-insert it properly so that it clicks into place.
  • If the whisk is damaged, you may need to replace it.

6. Frother Not Sat Properly On The Base

The frother needs to be adequately seated on its base for it to function correctly. If the frother is not properly seated, it will not work.

You may need to investigate why this has happened. Perhaps there is physical damage to either the frother or the base.

You may also need to clean the base and make sure there is no milk residue that prevents frother seating correctly.

7. Build-Up Of Gunk Due To Poor Cleaning

Like all kitchen appliances, regular cleaning of the Keurig frother is necessary. If you do not clean the frother frequently enough, milk residue may build up and impede its proper functioning.

Here’s how to do proper cleaning:

  • Turn off and unplug the frother.
  • Remove the whisk.
  • Wash all removable parts with warm water, including the lid and jug.
  • Clean the outside of the device using a damp cloth.
  • Allow all parts to dry before reassembly.

8. Problem With The Type Of Milk You Are Trying To Froth

Different milk types have varying milk fat content, which affects the frothing process. Dairy milk is easier to froth than, say, plant-based milk.

Here’s what you can do:

  • Use whole or 2% dairy milk or oat milk to froth.
  • Avoid using skimmed milk.
  • Be sure that the milk is chilled before putting it in the frother jug.
  • Experiment with different types of milk if possible.

9. Jug Stops Working Right After Starting The Frother

If the jug stops working immediately after starting the frother, the temperature might be the issue. Here’s what you can do:

  • Allow the jug and frother to cool down by unplugging and leaving it for some time.
  • Alternatively, try using colder milk to reduce the risk of overheating.

10. Frother’s Jug Is Overflowing

If the jug overflows during the frothing cycle, you may have put in too much milk or used a frothing whisk with a round ring. Try the following:

  • Add milk to the appropriate level.
  • Use the correct whisk attachment.
  • Frequently check the frothing process to monitor milk expansion.

11. Frother Motor Does Not Work

Sometimes the frothing motor malfunctions due to component damage such as milk residue on the whisk attachment. Here’s how to fix it:

  • Unplug the frother.
  • Remove the whisk and clean it.
  • Re-insert the whisk.
  • Plug in the frother and turn it back on.

12. Frother Is Producing Charred Milk

The Keurig frother is programmed to froth milk within a specific dosage, which can cause burnt milk if you overdo it. Here’s how to fix it:

  • Adjust the amount of milk you put in the frother jug.
  • Clean the frother, especially the whisk attachment.
  • Change the frother dosage setting to allow for less frothing time.

Properly Using Keurig Milk Frother

To ensure proper usage of your Keurig milk frother, follow these simple steps:

  • Ensure the frother is clean and functional.
  • Put in the frothing whisk at the bottom of the frother jug.
  • Fill the jug with chilled milk to the prescribed fill line.
  • Cover the jug with the frother lid carefully.
  • Select the Brew option and allow the machine to run the brewing process.
  • Once the process is complete, remove the jug from the base and use the frothed milk as needed.

Troubleshooting Steps for Keurig Milk Frother

If you encounter challenges with your Keurig milk frother, these troubleshooting steps can help:

  • Verify that you are using the correct milk type that supports the frothing process.
  • Verify that the whisk attachment is seated correctly.
  • Use the magnetic whisk attachment for best results.
  • Check whether there is any milk residue that may be interfering with the frother’s functioning.
  • Ensure that you clean the frother every after use.


In conclusion, the Keurig milk frother offers convenience for coffee lovers, allowing you to make high-quality frothed milk consistently. However, due to different factors, including misuse, equipment damage, and poor maintenance, your frother may fail to function correctly.

If you follow the steps outlined in this article, you can fix your Keurig milk frother issues and get back to enjoying frothed milk in your coffee. In conclusion, this article has covered various common Keurig milk frother issues and provided practical solutions to fix them.

These solutions include aligning the frothing wand correctly, covering the jug with its lid, removing gunk buildup through proper cleaning, and ensuring the correct milk type is selected. Using this information, you can troubleshoot and repair your Keurig milk frother to enjoy perfectly frothed milk in your coffee.

Remember to follow the proper usage steps and maintenance requirements to keep your frother in optimal condition and ensure a delightful coffee experience every time.

Popular Posts